| Model |
IE-3500H-12FT4T-E |
| Hardware configurations |
| Total Ports |
16 |
| 1000/100/10M M12 X-Code ports |
4 |
| 100/10M M12 D-Code ports |
12 |
| PoE budget |
- |
| Hardware specifications |
| Removeable Storage |
SD card |
| Alarms |
1 alarm output relay, 1 alarm input |
| Console Ports |
1 |
| Power Input |
Mini-change, single power source |
| Physical configurations |
| Dimensions (H x W x D) |
9.58 x 10.90 x 3.16 in.(24.33 x 27.69 x 8.03 cm) |
| Weight |
11.25 lb (5.10 kg) |
| Mounting |
Wall mount |
| Power specifications |
| Input voltage range (Absolute) |
12-48VDC |
| Input Voltage for PoE |
NA |
| Input current @ (9.6V/60V) |
3.4A |
| Power consumption @ (9.6V / 60V) |
41W |
| MTBF (in hours) |
412,063 Hrs |
| Performance and scalability features |
| Forwarding rate |
Line rate for all ports for all packet sizes |
| Number of queues |
8 |
| Unicast MAC addresses |
24000 |
| IGMP multicast groups |
1024 |
| No. of Active VLANs |
1024 |
| No. of VLAN IDs |
4096 |
| IPv4 Indirect routes |
7000 |
| IPv6 Indirect routes |
3500 |
| Spanning Tree Protocol instances |
128 |
| Access Control Entries (PACLs) |
1536 |
| DRAM |
8 GB |
| Flash (user accessible) |
5.1 GB |
| SD card capacity1 |
16 GB |
| Jumbo Frames2 |
9198 bytes |
| Number of SVI |
32 |
| Network Essentials license (perpetual) |
| Layer 2 switching |
IEEE 802.1Q, 802.1w,802.1ab,802.1s, 802.3ad, NTP, UDLD, CDP, LLDP, unicast MAC filter, PAgP, LACP VTPv2, VTPv3, EtherChannel, Q-in-Q tunneling, voice VLAN, PVST+, MSTP, RSTP, Selective Q-in-Q, Layer 2 Tunneling |
| Multicast |
IGMPv1, v2, v3 snooping, IGMP filtering, IGMP querier, Multicast Listener Discovery (MLD) |
| Management |
WebUI, MIB, SNMP, syslog, DHCP server, SPAN session, RSPAN, FSPAN, FRSPAN, ERSPAN, Express setup, NETCONF, RESTCONF |
| Security |
Port security, 802.1x, Dynamic Host Configuration Protocol (DHCP) snooping, dynamic ARP inspection, IP source guard, guest VLAN, MAC authentication bypass, 802.1x multidomain authentication, storm control - unicast, multicast, broadcast, SCP, SSH, SNMPv3, TACACS+, RADIUS server/client, MAC address notification, BPDU guard, Access Lists(PACL/RACL/VACL), SUDI 2099 (Secure Unique Device identifier), Full Flexible NetFlow (FNF), MACsec-128 |
| Quality of Service (QoS) |
Ingress policing, rate limit, egress queuing/shaping, auto QoS |
| IPv6 |
IPv6 host support, SNMP over IPv6, HTTP/HTTP(s) over IPv6, SNMP over IPv6, Syslog over IPv6, DHCPv6 relay source, DHCPv6 bulk lease query (RFC 5460), IPv6 stateless Auto Config, SCP/SSH, Radius, TACACS+, NTP over IPv6, IPv6 VRF aware BGPv6, IPV6 ND cache expire, IPv6 support for TFTP, IPv6 DNS transport, IPv6 QoS, IPv6 FHS RA Guard, IPv6 FHS DHCPv6 Guard |
| Layer 3 routing |
Inter-VLAN routing, Static routing, Open Shortest Path First, OSPF v3, Routing Information Protocol (RIP), Policy-Based Routing (PBR) |
| Industrial Ethernet |
CIP Ethernet/IP, IEEE 1588 PTP v2 (default and power)3, PROFINET |
| TSN |
Frame-Preemption (802.3br, 802.1QBu)1 |
| Redundancy |
Resilient Ethernet Protocol (REP) ring, PROFINET-Multi Ring Protocol (MRP), REP Fast, REP Segment ID Auto-discovery1, REP ZTP Support, Parallel redundancy protocol (PRP)2, PTP over PRP2, PTP over HSR2, High-Availability Seamless Redundancy (HSR-SAN)2, Device Level Ring (DLR)2, HSR-PRP Dual Redbox2 |
| Utility |
Dying gasp, SCADA protocol classification – GOOSE messaging, MODBUS TCP/IP |
| Automation |
YANG, NETCONF, RESTCONF |
| Industrial Management |
Layer 2 switching with 1:1 switch Network Address Translation (L2NAT) for 1G/10G uplink ports |
| IOx |
Container (Native Docker), Cisco Cyber Vision, Secure Equipment Access, Cisco ThousandEyes |
| Compliance specifications |
| ITE safety standards/ certifications |
UL/cUL Listing to UL/CSA 60950-1 |
| UL/cUL Listing to UL/CSA 62368-1 |
| CB to IEC 62368-1 with all country national deviations |
| ICE and manufacturing safety standards/ certifications |
UL/cUL Listing to UL/CSA 61010-2-201 |
| Water and dust protection standards/ratings |
IEC 60529: IP66/IP67 |
| UL 50E, Type 4X rating |
| EMC emissions and immunity compliance |
Emissions (Class A): |
| FCC 47 CFR Part 15 subpart B |
| ICES-003 |
| EN 55011 |
| EN 55032/ CISPR 32 |
| AS/NZS CISPR 32 |
| CNS15936 |
| Immunity: |
| EN55035/CISPR35 |
| AS/NZS CISPR35 |
| KS C 9832 |
| Shock and vibration |
IEC 60068-2-6 Vibration: IEC 60068-2-6, |
| IEC60255-21-1 (Vibration) Class 1 Vibration Test |
| IEC 60068-2-27 (Shock) |
| IEC 60068-2-31 (Shock) |
| IEC 60068-2-32 (Shock) |
| IEC 60255-21-2 (Shock) |
| IEC 60068-2-64 (Vibration) |
| IEC 60255-21-3 (Seismic) |
| Industry standards |
EN 61000-6-1 Immunity standards for light industrial ENV |
| EN 61000-6-2 Immunity standards for industrial ENV |
| EN 61000-6-4- Emission standard industrial ENV |
| EN 61326-1 Industrial control |
| ODVA Industrial Ethernet/IP |
| Automotive |
UN ECE R102 |
| E-Mark certification2 |
| Railway |
EN50155:2021 (clauses 13.4.1-6, 13.4.9, 13.4.10, 13.4.13)2 |
| EN50121-3-2:2016+A1:2019 |
| EN50121-4:2016+A1:2019 |
| EN61373:2010/AC:2017 (in progress) |
| EN50124-1:20172 |
| AREMA C&S Manual Section 11, 19 |
| EN50153:2020 Clause 8.32 |
| EN45545-22 |
| Corrosive testing |
IEC 60068-2-52 Salt mist |
| IEC 60068-2-60 Flowing mixed gas corrosion |
| Humidity |
IEC 60068 -2-3 |
| IEC 60068-2-30 |
| Relative humidity: 5% to 95% noncondensing |
| Operating temperature, environment, reliability |
-40°C to +75°C (-40F to 167F) with 200 LFM airflow |
| -40°C to +70°C (-40F to 158F) with 40 LFM airflow |
| -40°C to + 60°C (-40F to 140F) with 0 LFM airflow |
| -40°C to +85°C (-40F to 185F) (type tested to +85°C for 16 hours) |
| IEC 60068-2-1 |
| IEC 60068-2-2 |
| Altitude: up to 15,000 feet, no derating |
| Altitude: up to 40,000 feet, 25°C Max |
| Storage temperature |
-40°C to +85°C (-40F to 185F) |
| IEC 60068-2-14 |
| Altitude: Up to 40,000 feet (12.19 km) |
| Environment |
RoHS, WEEE, REACH compliant |