Cisco UCS C245 M6 UCSC-C245-M6SX1 thuộc dòng Cisco UCS C-Series Rack Servers, là máy chủ rack 2RU sử dụng bộ xử lý AMD EPYC và được thiết kế cho các hệ thống doanh nghiệp cần khả năng mở rộng bộ nhớ, lưu trữ và kết nối I/O. Thiết bị hỗ trợ 1 hoặc 2 bộ xử lý AMD Milan hoặc Rome, cùng 32 khe DIMM DDR4 RDIMM/LRDIMM. Cấu hình SFF cung cấp 24 khay ổ đĩa phía trước, hỗ trợ ổ SAS/SATA và có thể sử dụng tối đa 4 ổ NVMe ở các bay 1–4. Ngoài ra, hệ thống có thể hỗ trợ tối đa 4 ổ NVMe SFF ở phía sau tùy cấu hình.

Đặc điểm nổi bật Cisco UCS C245 M6 UCSC-C245-M6SX1
- Thiết kế máy chủ rack 2RU, phù hợp triển khai trong tủ rack tiêu chuẩn.
- Hỗ trợ 1 hoặc 2 bộ xử lý AMD EPYC Milan hoặc Rome.
- Trang bị 32 khe DIMM hỗ trợ DDR4 RDIMM và LRDIMM.
- Hỗ trợ tối đa 24 ổ SFF SAS/SATA phía trước.
- Có thể sử dụng tối đa 4 ổ NVMe tại các khay phía trước 1–4.
- Hỗ trợ tối đa 4 ổ NVMe SFF gắn phía sau.
- Hỗ trợ cấu hình I/O-centric với tối đa 8 khe PCIe.
- Hỗ trợ Cisco 12G SAS RAID Controller hoặc tối đa 2 Cisco 12G SAS HBA.
- Trang bị khe mLOM/OCP 3.0, hỗ trợ Cisco VIC và card mạng OCP 3.0.
- Hỗ trợ quản lý máy chủ thông qua Cisco Intersight và Cisco Integrated Management Controller (CIMC).
Ứng dụng thực tế Cisco UCS C245 M6 UCSC-C245-M6SX1
Cisco UCSC-C245-M6SX1 phù hợp triển khai trong doanh nghiệp và trung tâm dữ liệu cho các hệ thống máy chủ ứng dụng, cơ sở dữ liệu, ảo hóa, lưu trữ và các workload yêu cầu khả năng mở rộng I/O. Với 24 khay SFF, tùy chọn NVMe phía trước và phía sau cùng khả năng mở rộng PCIe, thiết bị có thể được cấu hình linh hoạt theo nhu cầu lưu trữ và kết nối của từng hệ thống
Xem thêm
Rút gọn
| Model | UCSC-C245-M6SX1 |
| Description | |
| Chassis | Two-Rack-Unit (2RU) chassis |
| CPU | One or two AMD Milan or Rome processors |
| Memory | 32 slots for registered DIMMs (RDIMMs) or load-reduced DIMMs (LRDIMMs) |
| Multi-bit error protection | This server supports multi-bit error protection. |
| Video | The Cisco Integrated Management Controller (CIMC) provides video using the Matrox G200e video/graphics controller: |
| ● Integrated 2D graphics core with hardware acceleration | |
| ● Embedded DDR memory interface supports up to 512 MB of addressable memory (8 MB is allocated by default to video memory) | |
| ● Supports display resolutions up to 1920 x 1200 16 bpp @ 60 Hz | |
| ● High-speed, integrated 24-bit RAMDAC | |
| ● Single-lane PCI-Express host interface running at Gen 1 speed | |
| Power subsystem | Up to two of the following hot-swappable power supplies: |
| ● 1050 W (AC) | |
| ● 1050 W (DC) | |
| ● 1600 W (AC) | |
| ● 2300 W (AC) | |
| One power supply is mandatory; one more can be added for 1 + 1 redundancy. | |
| Front panel | A front-panel controller provides status indications and control buttons. |
| ACPI | This server supports the Advanced Configuration and Power Interface (ACPI) 4.0 standard. |
| Fans | Six hot-swappable fans for front-to-rear cooling |
| InfiniBand | The InfiniBand architecture is supported by the PCIe slots. |
| Expansion slots | ● Riser 1A (3 PCIe slots) |
| ● Riser 1B (2 drive bays) | |
| ● Riser 2A (3 PCIe slots) | |
| ● Riser 3A (2 PCIe slots) | |
| ● Riser 3B (2 drive bays) | |
| ● Riser 3C (1 PCIe slot) | |
| ● Dedicated slots for a Cisco 12G SAS RAID controller or Cisco 12G SAS HBA | |
| Interfaces | Rear panel: |
| ● One 1Gbase-T RJ-45 management port | |
| ● One RS-232 serial port (RJ45 connector) | |
| ● One DB15 VGA connector | |
| ● Two USB 3.0 port connectors | |
| ● One flexible modular LAN on motherboard (mLOM)/OCP 3.0 slot that can accommodate various interface cards | |
| Front panel: | |
| ● One KVM console connector (supplies two USB 2.0 connectors, one VGA DB15 video connector, and one serial port (RS232) RJ45 connector) | |
| ● Up to 24 front SFF SAS/SATA Hard Drives (HDDs) or SAS/SATA Solid State Drives (SSDs) | |
| ● Optionally, up to four front SFF NVMe PCIe SSDs | |
| These drives must be placed in front drive bays 1, 2, 3, and 4 only and are connected to CPU 2. The rest of the bays (5 - 24) can be populated with SAS/SATA SSDs or HDDs. | |
| ● Optionally, up to four SFF rear-facing NVMe drives | |
| Internal storage devices | Other storage: |
| ● A mini-storage module connector on the motherboard supports a boot-optimized RAID controller carrier that holds two SATA M.2 SSDs. Mixing different capacity SATA M.2 SSDs is not supported. | |
| Integrated management processor | A Baseboard Management Controller (BMC) runs Cisco Integrated Management Controller (CIMC) firmware. |
| Depending on your CIMC settings, the CIMC can be accessed through the 1-GE dedicated management port or a Cisco Virtual Interface Card (VIC). | |
| CIMC manages certain components within the server, such as the Cisco 12G SAS HBA. | |
| Storage controllers | One Cisco M6 12G SAS RAID controller or up to two Cisco 12G SAS HBAs plug into a dedicated slot. |
| Cisco M6 12G SAS RAID Controller with 4GB FBWC: | |
| ● RAID support (RAID 0, 1, 5, 6, 10, 50, 60, SRAID0, and JBOD mode) | |
| ● Supports up to 24 internal SAS/SATA drives | |
| ● Plugs into a dedicated slot | |
| Cisco 12G SAS HBA: | |
| ● No RAID support | |
| ● JBOD/Pass-through Mode support | |
| ● Supports up to 16 SAS/SATA internal drives | |
| ● Plugs into a dedicated slot | |
| Modular LAN on Motherboard (mLOM)/ Open Compute Project (OCP) 3.0 slot | The dedicated mLOM/OCP 3.0 slot on the motherboard can flexibly accommodate the following cards: |
| ● Cisco Virtual Interface Cards (VIC) | |
| ● OCP 3.0 network interface card (UCSC-O-ID10GC) | |
| Intersight | Intersight provides server management capabilities |
| Cisco Integrated Management Controller (CIMC) | Requires CIMC Release 4.2(1) or later |
| Operating temperature | Minimum 10°C to 35°C (50°F to 95°F) with no direct sunlight (if any A10, A100, or rear HDDs are installed, the 35°C (50°F) restriction changes to 30°C (86F) |
| Maximum allowable operating temperature derated 1C/300 m (1F/547 ft) above 950 m (3117 ft) | |
| Extended operating temperature | 5°C to 40°C (41°F to 104°F) with no direct sunlight |
| Maximum allowable operating temperature de-rated | |
| 1C/175 m (1F/319 ft) above 950 m (3117 ft) | |
| 5°C to 4°5C (41°F to 113°F) with no direct sunlight | |
| Maximum allowable operating temperature de-rated | |
| 1C/125 m (1F/228 ft) above 950 m (3117 ft) | |
| System performance may be impacted when operating in the extended operating temperature range. | |
| Operation above 40°C is limited to less than 1% of annual operating hours. | |
| Hardware configuration limits apply to extended operating temperature range. | |
| Non-operating temperature | Below -40°C or above 65°C (below -40°F or above 149°F) |
| Maximum rate of change (operating and non-operating) 20°C/hr (36°F/hr) | |
| Operating relative humidity | 8% to 90% and 24°C (75°F) maximum dew-point temperature, non-condensing environment |
| Non-operating relative humidity | 5% to 95% and 33°C (91°F) maximum dew-point temperature, non-condensing environment |
| Operating altitude | 0 m to 3050 m {10,000 ft) |
| Non-operating altitude | Below 0 m or above 12,000 m (39,370 ft) |
Vui lòng để lại số điện thoại hoặc lời nhắn, nhân viên sẽ liên hệ trả lời bạn sớm nhất
Switch Cisco
Switch Meraki
Switch HPE Aruba
Switch Huawei
Switch Alcatel
Switch Extreme
Switch Juniper
Switch Fortinet
Switch Allied Telesis
Switch Unifi
Firewall FortiNet
Firewall Cisco
Firewall SonicWall
Firewall CheckPoint
Firewall Sophos
Firewall WatchGuard
Firewall Meraki
Firewall PaloAlto
Firewall Huawei
Router Cisco
Router Huawei
Router Juniper
Router HPE
Router Mikrotik
Wifi Cisco
Wifi Extreme
Wifi Meraki
Wifi Huawei
Wifi Alcatel
Wifi Fortinet
Wifi Aruba
Wifi Unifi
Module Cisco
Module Fortinet
Module Mikrotik
Server Dell
Server HPE
Server Cisco
NAS Synology
NAS Qnap
Microsoft Software
Kaspersky License
Zoom License
Video Conference
Điện thoại IP
Bộ lưu điện UPS
Tủ Rack
Cáp quang
Cáp mạng